Engraver Tube Description
This CO2 glass laser engraver tube is mainly used for laser engraving machines, laser marking machines, laser engraving machines, laser cutting machines.
The laser tube is the core component light, and can be carved and cut acrylic, cloth, leather, bamboo, wood, engraving, etc.
It is excellent in laser spot mode, has a long service life and has strong laser energy.
NOTES: The 40W is 700mm (± 5mm) in length, the 50W is 800mm (± 5mm) and 60W (1250mm (± 5mm)
Laser Engraver Tube Features
- High-quality, reliable and long life.
- Unique glass metal sealing technology.
- Adjustable resonator, good beam quality.
- The catalyst plated in the discharge tube coordinates unique electrode treatment technique to make discharge more stably.
- A Professional water cooling and hermetic 40W (700mm ± 5mm) /50W (800mm ± 5mm) /60W (1250mm ± 5mm)
Specifications
- Power output: 40W (700mm ± 5mm) 50W (800mm ± 5mm) 60W (1250mm ± 5mm)
Wavelength: 10.6μm - Outer diameter:50 mm
- Gross Weight: 1.5kg
- Beam diameter: 3mm
- Power stability:±5%
- Triggering voltage: 24 KV
- Operating voltage: 16 KV
- Optimal operating current: 22 mA
- Cooling system: Water cooling
- Optimum working water temperature:15-35 degrees
- Engraver tube service life:3000-4500 Hours (According to the water temperature, continuous workload, the use of laser intensity and other aspects to determine)
Package Content
- 1x Laser Engraver Tube (select wattage)
Attention
- After 3-4 hours of use, advise to take a break of 30mins
- This laser engraver tube should be used under normal working conditions
Customer Noices
With regards to our Laser Engravers, please note that the 40 watt machines are only for engraving purposes.
50 watt versions can use for both engraving and cutting and the 60 watt would complete the applications quicker and more efficiently.
It is necessary to use a water cooling system to maintain and protect the engraver tube.
Any overheating to the laser tube shall and will cause damage to the internal mirrors.
Any damage that due to overheating will not cover by warranty and cannot replace a new one.
For cutting purpose please make sure it’s under low percentage power,
Low speed and not for a long time cutting, incorrect using will much lower the life using of the engraver tube can easily use up the engraving laser tube.
Low speed and not for a long time cutting, incorrect using will much lower the life using of the engraver tube can easily use up the engraving laser tube.
