T-Shirt Making Vinyl for Heat Press by Minseo 3D, Foam and Opal PU

£9.27£268.00

Clear
SKU: Minseo-3D-Foam-Opal_P Categories: , , ,

T-Shirt Making Vinyl for Heat Press by Minseo 3D, Foam and Opal PU

3D PU (Cuttable)
Thick material

3D PU is Polyurethane based thick material which is thicker than our normal PU

SPECIFICATION

– Thickness(excluding 120micron PET liner): 690 micron
– Size: 0.5m(20”) * 25m(27.34yd) per roll

TRANSFER CONDITION

– Temperature: 140-145°C
– Pressing time: 8 seconds
– Pressure: about 32-36psi
– Peeling condition: Cool peel

HOW TO USE

1. Cut the film in mirror image
2. Weed the useless parts
3. Place the film on the garment
4. Heat apply

5. Remove application tape when it is cool

**Remark : The sharp blade is highly required for better cutting result.

 

AVAILABLE COLORS

5 colors – Please see images

 

 

White(3D-01) Black(3D-02) Yellow(3D-03) Blue(3D-04) Red(3D-05)

RECOMMENDED FABRICS

100% cotton, 100% polyester Poly/cotton blends, Acrylics

 

 

Foam PU (Cuttable)

This HTV is polyurethane based funky puffy vinyl which rises after heat pressing and maintains
awesome foaming effect.
Foam PU is highly suitable for letter as below pictures.

SPECIFICATION

– Thickness(excluding 125micron PET liner):
150-155 micron

– Size: 510mm*25m per roll

 

 

 

 

TRANSFER CONDITION

– Temperature: 140°C
– Pressing time: 6 seconds
– Pressure: low
– Peeling condition: remove transfer tape immediately

HOW TO USE

1. Cut the film in mirror image
2. Weed the useless parts
3. Place the film on the garment
4. Heat apply

5. Remove application tape when it is cool

AVAILABLE COLORS

2 colors
– Please see images

White(FM-01) Black(FM-02)

RECOMMENDED FABRICS

100% cotton, 100% polyester Poly/cotton blends, Acrylics

OPAL (Cuttable)

SPECIFICATION

– Thickness(excluding 120micron PET liner)
: about 110 micron

– Size: 0.5m(20”) * 50m(54.68yd) per roll

TRANSFER CONDITION

– Temperature: 150°C
– Pressing time: 10 seconds
– Pressure: about 30kg
– Peeling condition: Cool peel

** This opalescent effect can be shown better on bright fabric rather than dark fabric.

HOW TO USE

1. Cut the film in mirror image 2. Weed the useless parts
3. Place the film on the garment & Heat press 4. Remove application tape when it is cool

AVAILABLE COLORS

4 colors
– Please see images

Red(OP-01) Orange(OP-02) Green(OP-03) Purple(OP-04)

RECOMMENDED FABRICS

100% cotton, 100% polyester Poly/cotton blends, Acrylics

All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance for
conditions not under manufacturer’s control. Before using, please determine the suitability of product for its intended use. The user assumes all
risk and liability whatsoever in connection with the use of this product. Seller’s and manufacturer’s only obligation shall be to replace such
quantity of the product proved to be defective by manufacturer.

Additional information

Brand

MINSEO

MPN

Minseo-3D-Foam-Opal_P

UPC|EAN

5.05567E+12

Length

1m, 3m, 5m, 10m, 25m

Colour

3D White (3D-01), 3D Black (3D-02), 3D Yellow (3D-03), 3D Blue (3D-04), 3D Red (3D-05), Foam White (FM-01), Foam Black (FM-02), Opal Red (OP-01), Opal Orange (OP-02), Opal Green (OP-03)