Microtec Pneumatic Double Location Shuttle Heat Press APDS-15
38x38cm
Description
As an expert in its field, Microtec is renowned for the quality and reliability of its products.
The APDS Pneumatic Double Location Shuttle Heat Press is a high production, twin station, full automatic air operated heat transfer press. Designed for optimal pressing efficiency in a demanding heat transfer production environment, the APDS Shuttle Press removes operator inefficiency and pressing delays in a compact and user-friendly design.
By utilising the shuttling heat platen and dual press bed, the press allows for constant pressing, operator can prepare the next product/print while the opposite table is being pressed. The next set of work is immediately available for pressing after the prior cycle, therefore minimising both operator and press idle time.
Coupled with the Digital Microtec state-of-the-art control system, and a solid steel and casting frame structure, the APDS provides extended dependable service in even the most demanding production environments.
The machine is configured for standard T-shirt, textile, canvas bag, flags & banners printing, and is easily adapted for other substrates such as ceramics, woods, metals, mousepads and fusing & laminating applications.
Air compressor requirements
- Motor: 3HP
- Tank: 35L
- Air delivery: 120L/min
- Pressure: 8bar
- 3HP=1500W
Features
- Printing Size: 38x38cm
- Twin dual workstations with shuttle heat platen for fast, high speed production by a single operator
- Digital state-of-the-art time and temperature controller
- Automatic air operated pressing
- Built with a long lasting air cylinder lift system
- Open access emergency stop buttons
- Heat platen, wiring, and all controls are mounted on a solid stationary support to insure minimal maintenance
- Built-in safety alarm and circuit protection
- Suitable for sublimation transfer & heat transfer
- Fully digital time & temperature control 0-480sec/0°-225°C range
- Air regulator and gauge 0-1MPa/ 0-150PSI range
- Accommodates materials up to 50mm thick
- Temperature readout accuracy +-5°C – can show °C or °F
- Records number of pressing cycles done
Specifications
- Machine Dimensions: 970*860*600mm
- Printable Articles Max Size: 400*600mm*30mm
- Voltage: 220V/ 3 Phase; 120V/ 1 Phase
- Power: 220V/ 1.8KW ; 110V/ 1.2KW
- Recommend Setting: Time: 30~280s; 180~210℃
- Time Range: 0~999s
- Maximum Temp: 225°C
- Heating Tube Power: 1.8KW* 1pc
- Packaging size:1050*950*700mm
- Gross Weight: 97kg
Contents Include
- 1x APDS-15 Heat Press
